Logging Function - HEIDENHAIN TNC 640 User Manual

19
Touch Probe Cycles: Automatic Kinematics Measurement | KINEMATICS GRID (Cycle 453, DIN/ISO: G453,

Logging function

After executing Cycle 453 the TNC generates a protocol
(TCHPR453.html). This protocol is stored in the same directory as
the current program. It contains the following data:
Date and time of protocol creation
Path of the NC program from which the cycle was run
Number and name of the currently active tool
Mode
Measured data: Standard deviation and maximum deviation
Information at which position in degrees (°) the maximum
deviation occurred
Number of measuring positions
716
HEIDENHAIN | User's manual for cycle programming | 10/2017
option)