Please Note While Programming; Cycle Parameters - HEIDENHAIN TNC 640 User Manual

Cycles: Coordinate Transformations | MIRRORING (Cycle 8, DIN/ISO: G28)

Please note while programming:

If you work in a tilted system with Cycle 8 the following
procedure is recommended:
First program the tilting movement and
Cycle 8 MIRRORING!

Cycle parameters

Mirror image axis?: Enter the axis to be mirrored.
You can mirror all axes except for the spindle axis
—including rotary axes—with the exception of
the spindle axis and its associated auxiliary axis.
You can enter up to three axes. Input range: Up to
three NC axes X, Y, Z, U, V, W, A, B, C
HEIDENHAIN | User's manual for cycle programming | 10/2017
then call
NC blocks
79 CYCL DEF 8.0 MIRRORING
80 CYCL DEF 8.1 X Y Z
10
299