The Character Set Of The Fixed Cycle 225 Engraving Was - HEIDENHAIN TNC 620 User Manual

New cycle functions of software
New cycle functions of software 81760x-01

The character set of the fixed cycle 225 Engraving was

expanded by more characters and the diameter sign see
"ENGRAVING (Cycle 225, DIN/ISO: G225)", page 286
New machining cycle 275 Trochoidal milling see "TROCHOIDAL
SLOT (Cycle 275, DIN ISO G275, software option 19)",
page 212
New machining cycle 233 Face milling see "FACE MILLING
(Cycle 233, DIN/ISO: G233, software option 19)", page 168
In Cycle 205 Universal Pecking you can now use parameter
Q208 to define a feed rate for retraction see "Cycle parameters",
page 88
In the thread milling cycles 26x an approaching feed rate was
introduced see "Cycle parameters", page 115
The parameter Q305 NUMBER IN TABLE was added to Cycle
404 see "Cycle parameters", page 322
In the drilling cycles 200, 203 and 205 the parameter Q395
DEPTH REFERENCE was introduced in order to evaluate the T
ANGLE see "Cycle parameters", page 88
Cycle 241 SINGLE-LIP DEEP HOLE DRILLING was expanded
by several input parameters see "SINGLE-LIP DEEP-HOLE
DRILLING (Cycle 241, DIN/ISO: G241, software option 19)",
page 93
The probing cycle 4 MEASURING IN 3-D was introduced see
"MEASURING IN 3-D (Cycle 4, software option 17)", page 431
11
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015