Mitsubishi Electric MELSEC iQ-F FX5 Programming Manual page 1015

■Operation result
1.
Function without EN/ENO
The following table lists the operation results.
Operation result
No operation error occurred
An operation error occurred
2.
Function with EN/ENO
The following table lists the execution conditions and operation results.
Execution condition
EN
TRUE (Executes operation)
FALSE (Stops operation)
*1 When FALSE is output from ENO, data output from (d) is undefined. In that case, modify a program so that the data output from (d) is
not used.
Operation error
• (s2) and (s3) are the STRING type
Error code Description
(SD0/SD8067)
2820H "00H" is not set to a label specified by (s2) or devices from the device number to end device number of corresponding device.
"00H" is not set to a label specified by (s3) or devices from the device number to the end device number of corresponding device.
3406H The specified character string cannot be stored in a label specified by (d) or devices from the device number to the end device number of
corresponding device.
(d)
Operation output value
Indefinite value
Operation result
ENO
TRUE (Operation error did not occur)
*1
FALSE (Operation error occurred)
*1
FALSE
(d)
Operation output value
Indefinite value
Indefinite value
23 SELECTION FUNCTIONS
23.1 Selection
23
1013