Vrrp Router Interface Parameters - Alcatel-Lucent 7710 SR OS Configuration Manual

VRRP Router Interface Parameters

VRRP parameters are configured on a router interface with two contexts, owner or non-owner.
The status is specified when the VRRP configuration is created. When configured as owner,
the virtual router instance owns the backed up IP addresses. All other virtual router instances
participating in this message domain must have the same
configured as owner.
For IPv4, up to 4 virtual routers IDs (vrid) can be configured on a router interface. Each virtual
router instance can manage up to 16 backup IP addresses. For IPv6, only one virtual router
instance can be configured on a router interface.
VRRP parameters configured on a router interface must include the following:
The following example displays a sample configuration of a router interface owner and non-
owner VRRP configurations.
A:SR4>config>router# info
#------------------------------------------
echo "IP Configuration "
#------------------------------------------
#------------------------------------------
A:SR4>config>router#
Page 252
• VRID
• Backup IP address(es)
interface "system"
address 10.10.0.4/32
exit
interface "test1"
address 10.10.14.1/24
secondary 10.10.16.1/24
secondary 10.10.17.1/24
secondary 10.10.18.1/24
exit
interface "test2"
address 10.10.10.23/24
vrrp 1 owner
backup 10.10.10.23
authentication-type password
authentication-key "testabc"
exit
exit
vrid
7710 SR OS Router Configuration Guide
configured and cannot be