Alcatel-Lucent 7710 SR OS Configuration Manual page 184

===============================================================================
MVPN 1 configuration data
===============================================================================
signaling
UMH Selection
vrf-import
vrf-export
vrf-target
C-Mcast Import RT
ipmsi
admin status
hello-interval
tracking support
spmsi
join-tlv-packing
data-delay-interval: 3 seconds
data-threshold
===============================================================================
neighbor
Syntax neighbor [ip-int-name | ip-address | mac ieee-mac-address | summary]
Context show>router
Description
This command displays information about the IPv6 neighbor cache.
Parameters ip-int-name — Specify the IP interface name.
ip-address — Specify the address of the IPv6 interface address.
mac ieee-mac-address — Specify the MAC address.
summary — Displays summary neighbor information.
Output Neighbor Output — The following table describes neighbor output fields.
IPv6 Address
Interface
MAC Address
State
Exp
Type
Interface
Page 184
: Bgp
: Highest-Ip
: N/A
: N/A
: target:1:1
: target:10.20.1.3:2
: pim-asm 224.1.1.1
: Up
: N/A
: Disabled
: pim-ssm 225.0.0.0/32
: N/A
: 224.0.0.0/4 --> 1 kbps
Label
Displays the IPv6 address.
Displays the name of the IPv6 interface name.
Specifies the link-layer address.
Displays the current administrative state.
Displays the number of seconds until the entry expires.
Displays the type of IPv6 interface.
Displays the interface name.
auto-discovery
intersite-shared
three-way-hello
hello-multiplier
Improved Assert
Description
7710 SR OS Router Configuration Guide
: Enabled
: Enabled
: N/A
: 35 * 0.1
: N/A