Alcatel-Lucent 7710 SR OS Configuration Manual page 390

redirect-policy
Syntax
Context
Description
Default
Parameters
Page 390
[no] redirect-policy redirect-policy-name
config>filter
This command configures redirect policies.
The no form of the command removes the redirect policy from the filter configuration only if the
policy is not referenced in an IP filter and the IP filter is not in use (applied to a service or network
interface).
none
redirect-policy-name — Specifies the redirect policy name. Allowed values are any string up to 32
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes. There is
no limit to the number of redirect policies that can be configured.
7710 SR OS Router Configuration Guide