Alcatel-Lucent 7710 SR OS Configuration Manual page 444

Show Commands
Page 444
Label
Protocol
ICMP Type
Fragment
Sampling
IP-Option
TCP-syn
Match action
Ing. Matches
Src. Port
Dest. Port
Dscp
ICMP Code
Description (Continued)
The protocol ID for the match criteria.
col specified.
The ICMP type match criterion.
specified.
Configures a match on all non-fragmented IP packets.
False —
Configures a match on all fragmented IP packets.
True —
Fragments are not a matching criteria. All fragments and non-
Off —
fragments implicitly match.
Specifies that traffic sampling is disabled.
Off —
Specifies that traffic matching the associated IP filter entry is
On —
sampled.
Specifies matching packets with a specific IP option or a range of IP
options in the IP header for IP filter match criteria.
Configures a match on packets with the SYN flag set to
False —
false.
Configured a match on packets with the SYN flag set to true.
True —
The state of the TCP SYN flag is not considered as part of the
Off —
match criteria.
The filter does not have an explicit forward or drop
Default —
match action specified. If the filter entry ID indicates the entry is
, then the filter entry is incomplete as no action has been
(Inactive)
specified.
Drop packets matching the filter entry.
Drop —
The explicit action to perform is forwarding of the
Forward —
packet. If the action is Forward, then if configured the nexthop infor-
mation should be displayed, including Nexthop: <IP address>, Indi-
rect: <IP address> or Interface: <IP interface name>.
The number of ingress filter matches/hits for the filter entry.
The source TCP or UDP port number or port range.
The destination TCP or UDP port number or port range.
The DiffServ Code Point (DSCP) name.
The ICMP code field in the ICMP header of an IP packet.
7710 SR OS Router Configuration Guide
indicates no proto-
Undefined
indicates no ICMP type
Undefined