Alcatel-Lucent 7710 SR OS Configuration Manual page 365

Apply IP (v4/v6) and MAC Filter Policies to a Service
IP and MAC filter policies are applied by associating them with a SAP and/or spoke-sdp in ingress
and/or egress direction as desired. Filter ID is used to associate an existing filter policy, or if
defined, a Filter Name for that Filter ID policy can be used in the CLI.
The following output displays IP and MAC filters assigned to an ingress and egress SAP and
spoke SDP:
A:ALA-48>config>service>epipe# info
----------------------------------------------
----------------------------------------------
A:ALA-48>config>service>epipe#
7710 SR OS Router Configuration Guide
sap 1/1/1.1.1 create
ingress
filter ip 10
exit
egress
filter mac 92
exit
exit
spoke-sdp 8:8 create
ingress
filter ip "epipe sap default filter"
exit
egress
filter mac 91
exit
exit
no shutdown
Filter Policies
Page 365