Alcatel-Lucent 7710 SR OS Configuration Manual page 172

family — Specifies the router IP interface family to display.
Output Standard IP Interface Output — The following table describes the standard output fields for an IP
interface.
Interface-Name
Type
IP-Address
Adm
Opr
Mode
Port/SAP Id
Sample Output
A:ALA-A# show router interface
===============================================================================
Interface Table (Router: Base)
===============================================================================
Interface-Name
-------------------------------------------------------------------------------
ip-100.0.0.2
ip-100.128.0.2
ip-11.2.4.4
Page 172
Values
ipv4 — Displays only those peers that have the IPv4 family enabled.
Values
ipv6 — Displays the peers that are IPv6-capable.
Label
IP-Address
100.0.0.2/10
3FFE:1::2/64
FE80::200:FF:FE00:4/64
100.128.0.2/10
3FFE:2::2/64
FE80::200:FF:FE00:4/64
11.2.4.4/24
15::2/120
The IP interface name.
n/a — No IP address has been assigned to the IP interface, so the IP
address type is not applicable.
Pri — The IP address for the IP interface is the Primary address on
the IP interface.
Sec — The IP address for the IP interface is a secondary address on
the IP interface.
The IP address and subnet mask length of the IP interface.
— Indicates no IP address has been assigned to the IP interface.
n/a
Down — The IP interface is administratively disabled.
Up — The IP interface is administratively enabled.
Down — The IP interface is operationally disabled.
Up — The IP interface is operationally disabled.
Network — The IP interface is a network/core IP interface.
Service — The IP interface is a service IP interface.
The physical network port or the SAP identifier associated with the IP
interface.
Adm(v4/v6)
Up/Up
Up/Up
Up/Up
7710 SR OS Router Configuration Guide
Description
Opr(v4/v6) Mode Port/SapId
PfxState
Up/Up Network lag-1
n/a
PREFERRED
PREFERRED
Up/Up Network lag-2
n/a
PREFERRED
PREFERRED
Down/Down Network 1/1/1
n/a