Alcatel-Lucent 7710 SR OS Configuration Manual page 136

description
Syntax
Context
Description
Default
Parameters
shutdown
Syntax
Context
Description
Default
mh-secondary-interface
Syntax
Page 136
parameters indicates the complete mask that will be used ina logical 'AND' function to derive
the local subnet of the IP address. Note that a mask of 255.255.255.255 is reserved for system IP
addresses.
Values 128.0.0.0 - 255.255.255.255
netmask — The subnet mask in dotted decimal notation.
Values
0.0.0.0 - 255.255.255.255 (nework bits all 1 and host bits all 0).
description description-string
no description
config>router>mh-primary-interface
config>router>mh-secondary-interface
This command creates a text description stored in the configuration file for a configuration context.
The no form of the command removes the description string from the context.
no description
description-string — The description character string. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters. If the string contains special
character (#, $, space, etc.), the entire string must be enclosed within double quotes.
[no] shutdown
config>router>mh-primary-interface
config>router>mh-secondary-interface
The shutdown command administratively disables an entity. The operational state of the entity is
disabled as well as the operational state of any entities contained within. Many objects must be shut
down before they may be deleted.
Unlike other commands and parameters where the default state is not indicated in the configuration
file, shutdown and no shutdown are always indicated in system generated configuration files.
The no form of the command puts an entity into the administratively enabled state.
no shutdown
[no] mh-secondary-interface
7710 SR OS Router Configuration Guide