Configuring Cflowd Collectors - Alcatel-Lucent 7710 SR OS Configuration Manual

Configuring Cflowd Collectors

To configure cflowd collector parameters, enter the following commands:
CLI Syntax: config>cflowd#
The following example displays a basic cflowd configuration:
A:ALA-1>config>cflowd# info
-----------------------------------------
active-timeout 20
-----------------------------------------
A:ALA-1>config>cflowd#
Version 9 Collector example:
collector 10.10.10.9:2000 version 9
Page 490
collector ip-address[:port] [version version]
aggregation
as-matrix
destination-prefix
protocol-port
raw
source-destination-prefix
source-prefix
autonomous-system-type [origin | peer]
description description-string
no shutdown
template-set {basic | mpls-ip}
inactive-timeout 10
overflow 10
rate 100
collector 10.10.10.1:2000 version 8
aggregation
as-matrix
raw
exit
description "AS info collector"
exit
collector 10.10.10.2:5000 version 8
aggregation
protocol-port
source-destination-prefix
exit
autonomous-system-type peer
description "Neighbor collector"
exit
description "v9collector"
template-set mpls-ip
no shutdown
7710 SR OS Router Configuration Guide