Configuring Proxy Arp - Alcatel-Lucent 7710 SR OS Configuration Manual

Configuring Proxy ARP

To configure proxy ARP, you can configure:
•
•
•
CLI Syntax: config>router# policy-options
Page 76
A prefix list in the config>router>policy-options>prefix-list context.
A route policy statement in the config>router>policy-options>policy-statement context
and apply the specified prefix list.
 In the policy statement entry>to context, specify the host source address(es) for which
ARP requests can or cannot be forwarded to non-local networks, depending on the
specified action.
 In the policy statement entry>from context, specify network prefixes that ARP
requests will or will not be forwarded to depending on the action if a match is found.
For more information about route policies, refer to the OS Routing Protocols Guide.
Apply the policy statement to the proxy-arp configuration in the
config>router>interface context.
begin
commit
prefix-list name
prefix ip-prefix/mask [exact|longer|through
length|prefix-length-range length1-length2]
7710 SR OS Router Configuration Guide