Alcatel-Lucent 7710 SR OS Configuration Manual page 442

Show Commands
Entries
Description
-------------------------------------------------------------------------------
Filter Match Criteria : IPv6
-------------------------------------------------------------------------------
Entry
Ing. Matches : 9788619 pkts (978861900 bytes)
Egr. Matches : 9788619 pkts (978861900 bytes)
===============================================================================
*A:ALA-48#
ipv6
Syntax ipv6 {ipv6-filter-id [entry entry-id] [association | counters]}
Context show>filter
Description
This command shows IPv6 filter information.
Parameters ipv6-filter-id — Displays detailed information for the specified IPv6 filter ID and filter entries.
entry entry-id — Displays information on the specified IPv6 filter entry ID for the specified filter ID.
associations — Appends information as to where the IPv6 filter policy ID is applied to the detailed
counters — Displays counter information for the specified IPv6 filter ID. Note that egress counters
Output Show Filter (no filter-id specified) — The following table describes the command output for
the command when no filter ID is specified.
Page 442
: 1
: IPv6 filter configuration
: 10
Values
1 — 65535
Values 1 — 9999
filter policy ID output.
count the packets without Layer 2 encapsulation. Ingress counters count the packets with Layer 2
encapsulation.
Label
Filter Id
Scope
Applied
Description
The IP filter ID
The filter policy is of type template.
Template —
The filter policy is of type exclusive.
Exclusive —
The filter policy ID has not been applied.
No —
The filter policy ID is applied.
Yes —
The IP filter policy description.
7710 SR OS Router Configuration Guide
Description