Alcatel-Lucent 7710 SR OS Configuration Manual page 264

VRRP Network Interface Commands
Page 264
config
— router
— [no] interface
—
— no
— [no]
—
— no
—
— no
—
— no
— [no]
—
— [no]
—
— no
—
— no
—
— no
* Note that VRRP commands are applicable to router interfaces, IES interfaces and VPRN,
The authentication-key, authentication-type, bfd-enable, and ssh-reply commands are applicable
only to IPv4 contexts, not IPv6.
interface-name
address {ip-address/mask | ip-address netmask} [broadcast all-ones | host-ones]
address
allow-directed-broadcasts
arp-timeout seconds
arp-timeout
description description-string
description
secondary {ip-address/mask | ip-address netmask} [broadcast all-ones | host-
ones] [igp-inhibit]
secondary {ip-address/mask | ip-address netmask}
shutdown
static-arp ip-address ieee-address
static-arp ip-address
tos-marking-state {trusted | untrusted}
tos-marking-state
unnumbered [ip-int-name | ip-address]
unnumbered
vrrp virtual-router-id [owner] *
vrrp virtual-router-id
— authentication-key
— no authentication-key
— [no] backup ip-address
— [no] bfd-enable service-id interface interface-name dst-ip ip-address
— [no] bfd-enable interface interface-name dst-ip ip-address
— init-delay seconds
— no init-delay
— mac mac-address
— no mac
— [no] master-int-inherit
— message-interval
— no message-interval
— [no] ping-reply
— policy policy-id
— no policy
— [no] preempt
— priority priority
— no priority
— [no] ssh-reply
— [no] standby-forwarding
— [no] telnet-reply
— [no] shutdown
— [no] traceroute-reply
7710 SR OS Router Configuration Guide
[authentication-key | hash-key] [hash | hash2]
{[seconds] [milliseconds milliseconds]}