Show Commands - Alcatel-Lucent 7710 SR OS Configuration Manual

Show Commands

instance
Syntax instance
instance [interface interface-name [vrid virtual-router-id]
instance interface interface-name vrid virtual-router-id ipv6
Context show>vrrp
Description
This command displays information for VRRP instances.
If no command line options are specified, summary information for all VRRP instances displays.
Parameters interface ip-int-name — Displays detailed information for the VRRP instances on the specified IP
vrid virtual-router-id — Displays detailed information for the specified VRRP instance on the IP
ipv6 — Specifies the IPv6 instance.
Output VRRP Instance Output — The following table describes the instance command output fields for
VRRP.
7710 SR OS Router Configuration Guide
interface including status and statistics.
Default Summary information for all VRRP instances.
interface.
Default
All VRIDs for the IP interface.
Values
1 — 255
Label
Interface name
VR ID
Own
Owner
Adm
Opr
The name of the IP interface.
The virtual router ID for the IP interface
Yes — Specifies that the virtual router instance as owning the virtual
router IP addresses.
No — Indicates that the virtual router instance is operating as a non-
owner.
Up — Indicates that the administrative state of the VRRP instance is
up.
Down — Indicates that the administrative state of the VRRP instance
is down.
Up — Indicates that the operational state of the VRRP instance is up.
Down — Indicates that the operational state of the VRRP instance is
down.
Description
VRRP
Page 309