From The Filter Configuration; Deleting A Redirect Policy - Alcatel-Lucent 7710 SR OS Configuration Manual

Deleting a Redirect Policy

Before you can delete a redirect policy from the filter configuration, you must remove the policy
association from the IP filter.
The following example shows the command usage to replace the configured redirect policy
(redirect1) with a different redirect policy (redirect2) and then removing the redirect1 policy

from the filter configuration.

Example
redirect2
A:ALA-7>config>filter>ip-filter# info
----------------------------------------------
...
----------------------------------------------
A:ALA-7>config>filter>ip-filter#
Page 378
:
config>filter>ip-filter 11
config>filter>ip-filter# entry 1
config>filter>ip-filter>entry# action forward redirect-policy
config>filter>ip-filter>entry# exit
config>filter>ip-filter# exit
config>filter# no redirect-policy redirect1
description "This is new"
scope exclusive
entry 1 create
filter-sample
interface-disable-sample
match
dst-ip 10.10.10.91/24
src-ip 10.10.10.106/24
exit
action forward redirect-policy redirect2
exit
entry 2 create
description "new entry"
7710 SR OS Router Configuration Guide