Alcatel-Lucent 7710 SR OS Configuration Manual page 413

option-present
Syntax option-present {true | false}
no option-present
Context config>filter>ip-filter>entry>match
Description
This command configures matching packets that contain the option field in the IP header as an IP
filter match criterion.
The no form of the command removes the checking of the option field in the IP header as a match
criterion.
Parameters
true — Specifies matching on all IP packets that contain the option field in the header. A match will
false — Specifies matching on IP packets that do not have any option field present in the IP header.
src-ip
Syntax src-ip {ip-address[/mask]} [netmask
no src-ip
Context config>filter>ip-filter>entry>match
Description
This command configures a source IP address range to be used as an IP filter match criterion.
To match on the source IP address, specify the address and its associated mask, e.g. 10.1.0.0/16. The
conventional notation of 10.1.0.0 255.255.0.0 may also be used.
The no form of the command removes the source IP address match criterion.
Default
no src-ip
Parameters ip-address — The valid IP prefix for the IP match criterion in dotted decimal notation.
ip-prefix-list — creates a list of IPv4 prefixes for match criteria in IPv4 ACL and CPM filter
ip-prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
mask — The subnet mask length expressed as a decimal integer.
netmask — Any mask epressed in dotted quad notation.
7710 SR OS Router Configuration Guide
occur for all packets that have the option field present. An option field of zero is considered as no
option present.
(an option field of zero). An option field of zero is considered as no option present.
Values 0.0.0.0 — 255.255.255.255
policies.
characters are used, the string must be enclosed within double quotes.
Values
1 — 32
Values
0.0.0.0 — 255.255.255.255
| ip-prefix-list prefix-list-name
Filter Policies
]
Page 413