Alcatel-Lucent 7710 SR OS Configuration Manual page 122

cpu-protection
Syntax
Context
Description
Parameters
delayed-enable
Syntax
Context
Description
Parameters
local-proxy-arp
Syntax
Context
Description
Default
ldp-shortcut
Syntax
Context
Description
Page 122
cpu-protection policy-id
no cpu-protection
config>router>interface
This command assigns an existing CPU protection policy for the interface. The CPU protection
policies are configured in the config>sys>security>cpu-protection>policy cpu-protection-policy-id
context.
policy-id — Specifies an existing CPU protection policy.
Values
1 — 255
delayed-enable seconds
no delayed-enable
config>router>if
This command creates a delay to make the interface operational by the specified number of seconds
The value is used whenever the system attempts to bring the interface operationally up.
seconds — Specifies a delay, in seconds, to make the interface operational.
Values
1 — 1200
[no] local-proxy-arp
config>router>interface
This command enables local proxy ARP on the interface.
no local-proxy-arp
[no] ldp-shortcut
config>router
This command enables the resolution of IGP routes using LDP LSP across all network interfaces
participating in the IS-IS and OSPF routing protocol in the system.
7710 SR OS Router Configuration Guide