Configurable Parameters; Priority - Alcatel-Lucent 7710 SR OS Configuration Manual

Configurable Parameters

In addition to backup IP addresses, to facilitate configuration of a virtual router on Alcatel-Lucent
routers, the following parameters can be defined in owner configurations:
•
•
•
•
•
The following parameters can be defined in non-owner configurations:
•
•
•
•
•
•
•
•
•
•
Virtual Router ID (VRID)
The VRID must be configured with the same value on each virtual router associated with the
redundant IP address (IP addresses). It is placed in all VRRP advertisement messages sent by each
virtual router.

Priority

The priority value affects the interaction between this VRID and the same VRID of other virtual
routers participating on the same LAN. A higher priority value defines a greater priority in
becoming the virtual router master for the VRID. The priority value can only be configured when
Page 228
Virtual Router ID (VRID) on page 228
Message Interval and Master Inheritance on page 230
VRRP Message Authentication on page 232
Authentication Data on page 234
Virtual MAC Address on page 234
Virtual Router ID (VRID) on page 228
Priority on page 228
Message Interval and Master Inheritance on page 230
Master Down Interval on page 231
Preempt Mode on page 231
VRRP Message Authentication on page 232
Authentication Data on page 234
Virtual MAC Address on page 234
Inherit Master VRRP Router's Advertisement Interval Timer on page 235
Policies on page 235
7710 SR OS Router Configuration Guide