Filter Management Tasks; Renumbering Filter Policy Entries - Alcatel-Lucent 7710 SR OS Configuration Manual

Filter Management Tasks

This section discusses the following filter policy management tasks:
•
•
•
•
•
•

Renumbering Filter Policy Entries

The system exits the matching process when the first match is found and then executes the actions
in accordance with the specified action. Because the ordering of entries is important, the
numbering sequence may need to be rearranged. Entries should be numbered from the most
explicit to the least explicit.
The following example illustrates renumbering of filter entries.
Example
The following displays the original filter entry order on the left side and the reordered filter entries
on the right side:
Page 372
Renumbering Filter Policy Entries on page 372
Modifying a Filter Policy on page 374
Deleting a Filter Policy on page 376
Modifying a Redirect Policy on page 377
Deleting a Redirect Policy on page 378
Copying Filter Policies on page 379
:
config>filter>ip-filter# renum 10 15
config>filter>ip-filter# renum 20 10
config>filter>ip-filter# renum 40 1
7710 SR OS Router Configuration Guide