Alcatel-Lucent 7710 SR OS Configuration Manual page 167

fib
Syntax fib slot-number [family] [ip-prefix/prefix-length] [longer] [secondary] [exclude-services]
fib slot-number [family] summary
fib slot-number nh-table-usage
Context show>router
Description This command displays the active FIB entries for a specific CFM.
Parameters
slot-number — Displays routes only matching the specified chassis slot number.
family — Displays the router IP interface table to display.
ip-prefix/prefix-length — Displays FIB entries only matching the specified ip-prefix and length.
longer — Displays FIB entries matching the ip-prefix/mask and routes with longer masks.
secondary — Displays secondary VRF ID information.
summary — Displays summary FIB information for the specified slot number.
nh-table-usage — Displays next-hop table usage.
Sample Output
show router fib 1 131.132.133.134/32
========================================================================
FIB Display
========================================================================
Prefix
------------------------------------------------------------------------
131.132.133.134/32
------------------------------------------------------------------------
Total Entries : 1
------------------------------------------------------------------------
========================================================================
*A:Dut-C# show router fib 1 1.1.1.1/32
===============================================================================
7710 SR OS Router Configuration Guide
Values 1
Values
ipv4 — Displays only those peers that have the IPv4 family enabled.
ipv6 — Displays the peers that are IPv6-capable.
Values
ipv4-prefix:
ipv4-prefix-length:[
Values ipv6-prefix:
ipv6-prefix-length:
NextHop
66.66.66.66 (loop7)
Next-hop type: tunneled, Owner: RSVP, Tunnel-ID: <out-ifindex-from-route>
IP Router Configuration
a.b.c.d (host bits must be 0)
0 — 32
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
0 — 128
Protocol
OSPF
Page 167