Router Advertisement Commands - Alcatel-Lucent 7710 SR OS Configuration Manual

Router Advertisement Commands

router-advertisement
Syntax
Context
Description
Default
interface
Syntax
Context
Description
Default
Parameters
current-hop-limit
Syntax
Context
Description
Default
Parameters
Page 148
[no] router-advertisement
config>router
This command configures router advertisement properties. By default, it is disabled for all IPv6
enabled interfaces.
The no form of the command disables all IPv6 interface. However, the no interface interface-name
command disables a specific interface.
disabled
[no] interface ip-int-name
config>router>router-advertisement
This command configures router advertisement properties on a specific interface. The interface must
already exist in the config>router>interface context.
No interfaces are configured by default.
ip-int-name — Specify the interface name. If the string contains special characters (#, $, spaces, etc.),
the entire string must be enclosed within double quotes.
current-hop-limit number
no current-hop-limit
config>router>router-advert>if
This command configures the current-hop-limit in the router advertisement messages. It informs the
nodes on the subnet about the hop-limit when originating IPv6 packets.
64
number — Specifies the hop limit.
Values
0 — 255. A value of zero means there is an unspecified number of hops.
7710 SR OS Router Configuration Guide