Alcatel-Lucent 7710 SR OS Configuration Manual page 404

match
Syntax
Context
Description
Parameters
Page 404
Protocol Protocol ID
pim 103
vrrp 112
l2tp 115
stp 118
ptp 123
isis 124
crtp 126
crudp 127
match [next-header next-header]
no match
config>filter>ipv6-filter>entry
This command enables the context to enter match criteria for the filter entry. When the match criteria
have been satisfied the action associated with the match criteria is executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
The no form of the command removes the match criteria for the entry-id.
next-header — Specifies the IPv6 next header to match. Note that this parameter is analogous to the
protocol parameter used in IP-Filter match criteria.
Values
[0 — 42 | 45 — 49 | 52 — 59 | 61— 255] — protocol numbers accepted in decimal,
hexidecimal, or binary - DHB
keywords: none, crtp, crudp, egp, eigrp, encap, ether-ip, gre, icmp, idrp, igmp, igp,
ip, ipv6, ipv6-icmp, ipv6-no-nxt, isis, iso-ip, l2tp, ospf-igp, pim, pnni, ptp, rdp,
rsvp, stp, tcp, udp, vrrp
* — udp/tcp wildcard
Description
Protocol Independent Multicast
Virtual Router Redundancy Protocol
Layer Two Tunneling Protocol
Spanning Tree Protocol
Performance Transparency Protocol
ISIS over IPv4
Combat Radio Transport Protocol
Combat Radio User Datagram
7710 SR OS Router Configuration Guide