Common Configuration Tasks; Creating An Ip Filter Policy - Alcatel-Lucent 7710 SR OS Configuration Manual

Common Configuration Tasks

This section provides a brief overview of the tasks that must be performed for both IP and MAC
filter configurations and provides the CLI commands.
To configure a filter policy, perform the following tasks:
•
•
•
•
•
•

Creating an IP Filter Policy

Configuring and applying filter policies is optional. Each filter policy must have the following:
•
•
•
•
•
•
7710 SR OS Router Configuration Guide
Creating an IP Filter Policy on page 353
Creating an IPv6 Filter Policy on page 358
Creating a MAC Filter Policy on page 359
Creating Filter Log Policies on page 364
Creating a Match List for Filter Policies on page 363
Applying (IPv4/v6) Filter Policies to a Network Port on page 367
The filter type specified (IP)
A filter policy ID
A default action, either drop or forward
Filter policy scope specified, either exclusive or template
At least one filter entry with matching criteria specified
Optionally, an existing filter policy can have a Filter Name assigned, that can then be used
in CLI to reference that filter policy including assigning it to SAPs and/or network
interfaces.
Filter Policies
Page 353