Alcatel-Lucent 7710 SR OS Configuration Manual page 127

Description This command enables SNTP broadcasts received on the IP interface. This parameter is only valid
when the SNTP broadcast-client global parameter is configured.
The no form of the command disables SNTP broadcast received on the IP interface.
Default
no ntp-broadcast
port
Syntax port port-name
no port
Context config>router>interface
Description This command creates an association with a logical IP interface and a physical port.
An interface can also be associated with the system (loopback address).
The command returns an error if the interface is already associated with another port or the system. In
this case, the association must be deleted before the command is re-attempted. The port-id can be in
one of the following forms:
The no form of the command deletes the association with the port. The no form of this command can
only be performed when the interface is administratively down.
Default No port is associated with the IP interface.
Parameters
port-name — The physical port identifier to associate with the IP interface.
7710 SR OS Router Configuration Guide
• Ethernet interfaces
If the card in the slot has MDAs, port-id is in the slot_number/MDA_number/port_number
format; for example, 1/1/3 specifies port 3 of the MDA installed in MDA slot 1 on the card
installed in chassis slot 1.
• SONET/SDH interfaces
When the port-id represents a POS interface, the port-id must include the channel-id. The POS
interface must be configured as a network port.
Values port-id slot/mda/port[.channel]
bundle-id
bpgrp-id
aps-id
lag-id
IP Router Configuration
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 — 336
bpgrp-type-bpgrp-num
bpgrp keyword
type ima, ppp
bpgrp-num 1 — 256
aps-group-id[.channel]
aps keyword
group-id 1 — 16
lag-id
lag keyword
id 1 — 64
Page 127