Clear Commands - Alcatel-Lucent 7710 SR OS Configuration Manual

Clear Commands

ip
Syntax ip ip-filter-id [entry entry-id] [ingress | egress]
Context clear>filter
Description
Clears the counters associated with the IP filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default clears all counters associated with the IP filter policy entries.
Parameters
ip-filter-id — The IP filter policy ID.
entry-id — Specifies that only the counters associated with the specified filter policy entry will be
ingress — Specifies to only clear the ingress counters.
egress — Specifies to only clear the egress counters.
ipv6
Syntax ipv6 ip-filter-id [entry entry-id] [ingress | egress]
Context clear>filter
Description
Clears the counters associated with the IPv6 filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default
Clears all counters associated with the IPv6 filter policy entries.
Parameters
ip-filter-id — The IP filter policy ID.
entry-id — Specifies that only the counters associated with the specified filter policy entry will be
ingress — Specifies to only clear the ingress counters.
7710 SR OS Router Configuration Guide
Values 1 — 65535
cleared.
Values
1 — 65535
Values
1 — 65535
cleared.
Values 1 — 65535
Filter Policies
Page 467