Monitor Commands - Alcatel-Lucent 7710 SR OS Configuration Manual

Monitor Commands

filter
Syntax filter ip ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor
Description
This command monitors the counters associated with the IP filter policy.
Parameters ip-filter-id — The IP filter policy ID.
entry-id — Specifies that only the counters associated with the specified filter policy entry will be
interval — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
filter
Syntax filter ipv6 ipv6-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor
Description This command monitors the counters associated with the IPv6 filter policy.
Parameters
ipv6-filter-id — The IP filter policy ID.
entry-id — Specifies that only the counters associated with the specified filter policy entry will be
7710 SR OS Router Configuration Guide
Values
1 — 65535
monitored.
Values
1 — 65535
Default
10 seconds
Values
3 — 60
Default 10
Values
1 — 999
of the delta.
Values
1 — 65535
moniitored.
Values 1 — 65535
Filter Policies
Page 469