Configuring Cflowd - Alcatel-Lucent 7710 SR OS Configuration Manual

Configuring Cflowd

Use the CLI syntax displayed below to perform the following tasks:
•
•
•
•
CLI Syntax: config>cflowd#
7710 SR OS Router Configuration Guide
Enabling Cflowd on page 488
Configuring Global Cflowd Parameters on page 489
Configuring Cflowd Collectors on page 490
Enabling Cflowd on Interfaces and Filters on page 495
active-timeout minutes
cache-size num-entries
inactive-timeout seconds
template-retransmit seconds
overflow percent
rate sample-rate
collector ip-address[:port] {version [5 | 8 | 9 |10]}
aggregation
as-matrix
destination-prefix
protocol-port
raw
source-destination-prefix
source-prefix
template-set {basic | mpls-ip}
autonomous-system-type [origin | peer]
description description-string
no shutdown
no shutdown
Cflowd
Page 487