Filter Policy Commands - Alcatel-Lucent 7710 SR OS Configuration Manual

Filter Policy Commands

default-action
Syntax default-action {drop | forward}
Context config>filter>ip-filter
config>filter>ipv6-filter
config>filter>mac-filter
Description
This command specifies the action to be applied to packets when the packets do not match the
specified criteria in all of the IP filter entries of the filter.
When multiple default-action commands are entered, the last command will overwrite the previous
command.
Default
drop
Parameters
drop — Specifies all packets will be dropped unless there is a specific filter entry which causes the
forward — Specifies all packets will be forwarded unless there is a specific filter entry which causes
filter-name
Syntax filter-name filter-name
Context config>filter>ip-filter
config>filter>ipv6>filter
config>filter>mac-filter
Description
This command configures filter-name attribute of a given filter. filter-name, when configured, can be
used instead of filter ID to reference the given policy in the CLI.
Default no filter-name
Parameters
filter-name — A string of up to 64 characters uniquely identifying this filter policy.
scope
Syntax scope {exclusive | template}
no scope
Context config>filter>ip-filter
config>filter>ipv6-filter
config>filter>mac-filter
7710 SR OS Router Configuration Guide
packet to be forwarded.
the packet to be dropped.
Filter Policies
Page 395