Alcatel-Lucent 7710 SR OS Configuration Manual page 314

policy
Syntax
Context
Description
Parameters
Output
Page 314
Auth Failures : 0
IP TTL Errors : 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
policy [vrrp-policy-id [event event-type specific-qualifier]]
show>vrrp
This command displays VRRP priority control policy information.
If no command line options are specified, a summary of the VRRP priority control event policies dis-
plays.
vrrp-policy-id — Displays information on the specified priority control policy ID.
Default
All VRRP policies IDs
Values
1 — 9999
event event-type — Displays information on the specified VRRP priority control event within the
policy ID.
Default
All event types and qualifiers
Values
port-down port-id
lag-port-down lag-id
host-unreachable host-ip-addr
route-unknown route-prefix/mask
specific-qualifier — Display information about the specified qualifier.
Values port-id, lag-id, host-ip-addr, route-prefix/mask
VRRP Policy Output — The following table describes the VRRP policy command output fields.
Label
Policy Id
Current Priority & Effects
Current Explicit
Invalid Pkt Type
Pkt Length Errors : 0
The VRRP priority control policy associated with the VRRP virtual
router instance.
A value of 0 indicates that no control policy policy is associated with
the virtual router instance.
When multiple explicitly defined events associated with the priority
control policy happen simultaneously, the lowest value of all the cur-
rent explicit priorities will be used as the in-use priority for the virtual
router.
7710 SR OS Router Configuration Guide
: 0
Description