Alcatel-Lucent 7710 SR OS Configuration Manual page 396

Description
Default
Parameters
sub-insert-credit-control
Syntax
Context
Description
Default
Parameters
sub-insert-radius
Syntax
Context
Description
Default
Parameters
Page 396
This command configures the filter policy scope as exclusive or template. If the scope of the policy is
template and is applied to one or more services or network interfaces, the scope cannot be changed.
The no form of the command sets the scope of the policy to the default of template.
template
exclusive — When the scope of a policy is defined as exclusive, the policy can only be applied to a
single entity (SAP or network port). Attempting to assign the policy to a second entity will result
in an error message. If the policy is removed from the entity, it will become available for
assignment to another entity.
template — When the scope of a policy is defined as template, the policy can be applied to multiple
SAPs or network ports.
sub-insert-credit-control start-entry entry-id count count
no sub-insert-credit-control
config>filter>ip-filter
This command inserts point information for credit control for the filter.
The no form of the command reverts to the default.
none
entry entry-id — Identifies a filter on this system.
Values 1 — 65535
count count — Specifies the count.
Values
1 — 65535
sub-insert-radius start-entry entry-id count count
no sub-insert-radius
config>filter>ip-filter
This command insert point information for RADIUS for the filter.
The no form of the command reverts to the default.
none
entry entry-id — Specifies at what place the filter entries received from RADIUS will be inserted in
the filter.
Values
1 — 65535
7710 SR OS Router Configuration Guide