Redirect Policy Commands - Alcatel-Lucent 7710 SR OS Configuration Manual

Redirect Policy Commands

destination
Syntax
Context
Description
Default
Parameters
ping-test
Syntax
Context
Description
Default
drop-count
Syntax
Context
Description
Default
Parameters
Page 426
[no] destination ip-address
config>filter>redirect-policy
This command defines a cache server destination in a redirect policy. More than one destination can
be configured. Whether a destination IP address will receive redirected packets depends on the
effective priority value after evaluation.
none
ip-address — Specifies the IP address to send the redirected traffic.
[no] ping-test
config>filter>destination>ping-test
config>filter>destination>snmp-test
This command configures parameters to perform connectivity ping tests to validate the ability for the
destination to receive redirected traffic.
none
drop-count consecutive-failures [hold-down seconds]
no drop-count
config>filter>destination>ping-test
config>filter>destination>snmp-test
config>filter>destination>url-test
This command specifies the number of consecutive requests that must fail for the destination to be
declared unreachable.
drop-count 3 hold-down 0
consecutive-failures — Specifies the number of consecutive ping test failures before declaring the
destination down.
Values
1 — 60
7710 SR OS Router Configuration Guide