Alcatel-Lucent 7710 SR OS Configuration Manual page 433

Output Show Filter (with filter-id specified) — The following table describes the command output for
the command when a filter ID is specified.
7710 SR OS Router Configuration Guide
Label
Filter Id
Scope
Entries
Description
Applied
Def. Action
Filter Match
Criteria
Entry
Log Id
Src. IP
Dest. IP
Next-header
ICMP Type
Fragment
Sampling
The IP filter policy ID.
The filter policy is of type template.
Template —
The filter policy is of type exclusive.
Exclusive —
The number of entries configured in this filter ID.
The IP filter policy description.
The filter policy ID has not been applied.
No —
The filter policy ID is applied.
Yes —
The default action for the filter ID for packets that do not
Forward —
match the filter entries is to forward.
The default action for the filter ID for packets that do not
Drop —
match the filter entries is to drop.
Indicates the filter is an IP filter policy.
IP —
The filter ID filter entry ID. If the filter entry ID indicates the entry is
, then the filter entry is incomplete as no action has been
(Inactive)
specified.
The filter log ID.
The source IPv6 address and prefix length match criterion.
The destination IPv6 address and prefix length match criterion.
The next header ID for the match criteria.
next-header specified.
The ICMP type match criterion.
specified.
Configures a match on all non-fragmented IP packets.
False —
Configures a match on all fragmented IP packets.
True —
Fragments are not a matching criteria. All fragments and non-
Off —
fragments implicitly match.
Specifies that traffic sampling is disabled.
Off —
Specifies that traffic matching the associated IP filter entry is
On —
sampled.
Filter Policies
Description
Undefined
indicates no ICMP type
Undefined
indicates no
Page 433