Deleting A Block - Siemens SINUMERIK 840D sl Operating Manual

Teaching in a program

8.7 Deleting a block

8.7 Deleting a block
You have the option of deleting a program block entirely.
Requirement
"AUTO" mode: The program to be processed is selected.
Proceed as follows
8.8 Settings for teach-in
In the "Settings" window, you define which axes are to be included in the teach-in block and
whether motion-type and continuous-path mode parameters are to be provided.
Proceed as follows
166
1. Select the "Machine" operating area.
2. Press the <AUTO> or <MDA> key.
3. Press the <TEACH IN> key.
4. Press the "Teach prog." softkey.
5. Click the program block to be deleted.
6. Press the ">>" and "Delete block" softkeys.
The program block on which the cursor is positioned is deleted.
1. Select the "Machine" operating area.
2. Press the <AUTO> or <MDA> key.
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Universal