Time Programs; Switching Points; Standard Program; Holidays - Siemens Albatros 2 RVS13 Series User Manual

Delete all devices
Entering the switching
times

switching points

Standard program

Siemens
Building Technologies
The wireless connection to all devices will be canceled. If radio communication is
required again, a new binding must be established.
6.3.1

time programs

For the heating circuits and DHW heating, a number of switching programs are
available. They are activated in "Automatic" operation and control the change of the
temperature levels (and the associated setpoints) via the selected switching times.
The switching times can be set in a combined way, that is, either commonly for several
days or in the form of separate times for individual days. When preselecting groups of
days like for instance Mo...Fr and Sa...Su that use the same switching times, setting of
the switching programs is simplified.
Line no.
HC1 HC2 3/HCP 4/DHW
500 520 540 560
501 521 541 561
502 522 542 562
503 523 543 563
504 524 544 564
505 525 545 565
506 526 546 566
Line no.
HC1 HC2 3/HCP 4/DHW
516 536 556 576
All time programs can be reset to their default settings. Each time program has its own
operating line to make the reset.
In that case, individual settings will be lost!
6.3.2

Holidays

Line no.
HC1 HC2 HCP
642 652 662
643 653 663
648 658 668
The holiday program is used to switch the heating circuits to a selectable operating
level according to calendar dates.
· The holiday program can only be used in "Automatic" operation
User Manual
6 The settings in detail
Operating line
Preselection
Mo - Su
Mo - Fr
Sa - Su
Mo - Su
1st phase on
1st phase off
2nd phase on
2nd phase off
3rd phase off
3rd phase off
Operating line
Default values
Operating line
Start
End
Operating level
Frost protection
Reduced
55/109
CE1U2357en
2014-07-30