Configuring Igmp Accounting Globally - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast

Configuring IGMP Accounting Globally

To use this function, you should also enable Authentication, Authorization and Accounting
(AAA) globally and configure RADIUS server on the switch.
Follow these steps to enable IGMP Accounting globally.
1) Enable IGMP Accounting globally.
Accounting
2) Click Apply.
Configuring IGMP Authentication on the Port
To use this function, you should also enable AAA globally and configure RADIUS server on
the switch.
Follow these steps to enable IGMP Authentication on the port.
1) Specify the ports and enable IGMP Authentication.
IGMP
Authentication
2) Click Apply.
2.1.10 Configuring Static Member Port
This function allows you to specify a port as a static member port in the multicast group.
Choose the menu Multicast > Multicast Table > Static IPv4 Multicast Table to load the
following page.
Select Enable to enable IGMP Snooping accounting.
Select one or more ports and select Enable in the IGMP Authentication column.
IGMP Snooping Configurations
Configuration Guide 282