Diagnosing The Network - TP-Link T1600G-18TS Configuration Manual

Configuring Maintenance
5

Diagnosing the Network

The configuration includes:
 Configuring the Ping Test;
 Configuring the Tracert Test.
5.1 Using the GUI
5.1.1 Configuring the Ping Test
Choose the menu Maintenance > Network Diagnose > Ping to load the following page.
Figure 5-1 Configuring the Ping Test
Follow these steps to test the connectivity between the switch and another device in the
network:
1) In the Ping Config section, enter the IP address of the destination device for Ping test,
set Ping times, data size and interval according to your needs, and then click Ping to
start the test.
Diagnosing the Network
Configuration Guide 686