Setting The System Time - TP-Link T1600G-18TS Configuration Manual

Managing System
Step 5 show system-info
Verify the system information including system Description, Device Name, Device Location,
System Contact, Hardware Version, Firmware Version, System Time, Run Time and so on.
Step 6 end
Return to privileged EXEC mode.
Step 7 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to set the device name as Switch_A, set the location as
BEIJING and set the contact information as http://www.tp-link.com.
Switch#configure
Switch(config)#hostname Switch_A
Switch(config)#location BEIJING
Switch(config)#contact-info http://www.tp-link.com
Switch(config)#show system-info
System Description - JetStream 48-Port Gigabit Smart Switch with 4 SFP Slots
System Name
System Location
Contact Information - http://www.tp-link.com
...
Switch(config)#end
Switch#copy running-config startup-config

2.2.3 Setting the System Time

Follow these steps and choose one method to set the system time:
Step 1 configure
Enter global configuration mode.
- Switch_A
- BEIJING
System Info Configurations
Configuration Guide 31