TP-Link T1600G-18TS Configuration Manual page 492

Configuring Voice VLAN
Step 5 voice vlan aging time
Set the aging time for ports in automatic voice VLAN mode.
time:
voice packet. Aging time works only for ports in automatic voice VLAN mode. The range is 1 to
43200 minutes; the default is 1440 minutes.
Step 6 voice vlan vid
Specify an existing VLAN as the voice VLAN.
vid :
Step 7 interface { fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | port-channel lag-id | range port-channel lag-list }
Enter interface configuration mode.
port |port-list
lag-id |lag-list:
Step 8 switchport voice vlan mode { auto | manual }
Choose the way of adding the specified ports to the voice VLAN.
auto:
receive voice packets. If you choose the auto mode for the specified ports, make sure traffic
from your voice device is tagged.
manual:
Step 9 switchport voice vlan security
Enable the security feature.
For packets to the voice VLAN, the selected ports forward only voice packets whose source
MAC addresses match OUI addresses to the voice VLAN, and discard others. For packets to
other VLANs, how the switch processes the packets is determined by whether the selected
ports permit the VLAN or not, independent of voice VLAN security mode.
We recommend that you do not mix voice traffic with data traffic in the voice VLAN. If
necessary, make sure the security mode is disabled.
Step 10 switchport general allowed vlan vid { tagged | untagged }
(For ports in manual voice VLAN mode) Add the specified ports to the voice VLAN.
vid:
tagged | untagged:
Step 11 show voice vlan
Verify the global configuration of voice VLAN.
Step 12 show voice vlan switchport
Verify the voice VLAN configuration of the ports.
Specify the length of time that a port remains in the voice VLAN after the port receives a
Enter the VLAN ID that you have created for the voice VLAN.
: The number or the list of the Ethernet port that you want to configure.
The ID or the list of the LAG that you want to configure.
The switch automatically adds the specified ports to the voice VLAN when the ports
You need to manually add the specified ports to the voice VLAN.
Enter the voice VLAN ID to add the specified ports to the voice VLAN.
Set the egress rule as tagged or untagged for the specified ports.
Voice VLAN Configuration
Configuration Guide 469