TP-Link T1600G-18TS Configuration Manual page 76

Managing System
Step 2 Use the following command to set the interval to reboot:
reboot-schedule in interval [ save_before_reboot ]
(Optional) Specify the reboot schedule.
interval
from 1 to 43200 minutes.
save_before_reboot: Save the configuration file before the switch reboots.
Use the following command to set the time and date to reboot:
reboot-schedule at time [ date ] [ save_before_reboot ]
(Optional) Specify the reboot schedule.
time
date
be within 30 days.
save_before_reboot: Save the configuration file before the switch reboots.
If no date is specified, the switch reboots according to the time you have set. If the time you
set is later than the time that this command is executed, the switch will reboot later the same
day; otherwise the switch will reboot the next day.
Step 3 end
Return to privileged EXEC mode.
Step 4 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to set the switch to reboot at 12:00 on 15/01/2016.
Switch#configure
Switch(config)#reboot-schedule at 12:00 15/01/2016 save_before_reboot
Reboot system at 15/01/2016 12:00. Continue? (Y/N): Y
Reboot Schedule Settings
---------------------------
Reboot schedule at 2016-01-15 12:00 (in 17007 minutes)
Save before reboot: Yes
Switch(config)#end
Switch#copy running-config startup-config
: Specify a period of time. The switch will reboot after this period. The valid values are
: Specify the time for the switch to reboot, in the format of HH:MM.
: Specify the date for the switch to reboot, in the format of DD/MM/YYYY. The date should
System Tools Configurations
Configuration Guide 53