Configuring Forbidden Router Port - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
Switch#copy running-config startup-config

Configuring Forbidden Router Port

Step 1 configure
Enter global configuration mode.
Step 2 ip igmp snooping vlan-config vlan-id-list router-ports-forbidden interface {gigabitEthernet
port-list | port-channel port-channel-id }
port-list
VLAN.
Step 3 show ip igmp snooping vlan vlan-id
Show the basic IGMP snooping configuration in the specified VLAN.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable IGMP Snooping in VLAN 2 and forbid port
1/0/4-6 from becoming router ports (port 1/0/4-6 will drop all multicast data from Layer 3
devices):
Switch#configure
Switch(config)#ip igmp snooping
Switch(config)#ip igmp snooping vlan-config 2 router-ports-forbidden interface
gigabitEthernet 1/0/4-6
Switch(config)#show ip igmp snooping vlan 2
Vlan Id: 2
Router Time:0
Member Time:0
Static Router Port:None
Dynamic Router Port:None
Forbidden Router Port:Gi1/0/4-6
Switch(config)#end
Switch#copy running-config startup-config
and are the ports that cannot become router ports in the specified
port-channel-id
IGMP Snooping Configurations
Configuration Guide 294