TP-Link T1600G-18TS Configuration Manual page 88
T1600g series
Hide thumbs
Also See for T1600G-18TS:
- Installation manual (24 pages) ,
- User manual (961 pages) ,
- Configuration manual (771 pages)
Table of Contents
Advertisement
Managing System
Step 5
ip http secure-session timeout minutes
Specify the Session Timeout time. The system will log out automatically if users do nothing
within the Session Timeout time.
minutes
Step 6
ip http secure-max-users admin-num guest-num
Specify the maximum number of users that are allowed to connect to the HTTPS server. The
total number of users should be no more than 16.
For T1600G-18TS, the number of Operator, Power User and User can be set respectively.
admin-num
are from 1 to 16.
guest-num
or User. The valid value are from 0 to 15.
Step 7
ip http secure-server download certificate ssl-cert ip-address ip-addr
Download the desired certificate to the switch from TFTP server.
ssl-cert
certificate must be BASE64 encoded. The SSL certificate and key downloaded must match
each other.
ip-addr
supported.
Step 8
ip http secure-server download key ssl-key ip-address ip-addr
Download the desired key to the switch from TFTP server.
ssl-key
encoded.
ip-addr
supported.
Step 9
show ip http secure-server
Verify the global configuration of HTTPS.
Step 10
end
Return to privileged EXEC mode.
Step 11
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure the HTTPS function. Enable SSL3 and TLS1
protocol. Enable the ciphersuite of 3des-ede-cbc-sha. Set the session timeout time as 15,
the admin number as 1 and the guest number as 2. Download the certificate named ca.crt
and the key named ca.key from the TFTP server with the IP address 192.168.0.100.
Switch#configure
Switch(config)#ip http secure-server
Switch(config)#ip http secure-protocol ssl3 tls1
: Specify the timeout time, which ranges from 5 to 30 minutes. The default value is 10.
: Enter the maximum number of users whose access level is Admin. The valid value
: Enter the maximum number of users whose access level is Operator, Power User
: Specify the name of the SSL certificate, which ranges from 1 to 25 characters. The
: Specify the IP address of the TFTP server. Both IPv4 and IPv6 addresses are
: Specify the name of the key file saved in TFTP server. The key must be BASE64
: Specify the IP address of the TFTP server. Both IPv4 and IPv6 addresses are
Access Security Configurations
Configuration Guide
65
Hide quick links:
Advertisement
Table of Contents
