Enabling Mac Vlan For The Port - TP-Link T1600G-18TS Configuration Manual

Configuring MAC VLAN
Step 4
Step 5
The following example shows how to bind the MAC address 00:19:56:8A:4C:71 to VLAN 10,
with the address description as Dept.A.
Switch#configure
Switch(config)#mac-vlan mac-address 00:19:56:8a:4c:71 vlan 10 description Dept.A
Switch(config)#show mac-vlan vlan 10
MAC-Addr
--------------
00:19:56:8A:4C:71
Switch(config)#end
Switch#copy running-config startup-config

2.2.3 Enabling MAC VLAN for the Port

Follow these steps to enable MAC VLAN for the port:
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
Name
-----------
Dept.A
configure
Enter global configuration mode.
interface { fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | port-channel lag-id | range port-channel lag-list }
Enter interface configuration mode.
: The number or the list of the Ethernet port that you want to configure.
port |port-list
The ID or the list of the LAG that you want to configure.
lag-id |lag-list:
mac-vlan
Enable MAC VLAN for the port.
show mac-vlan interface
Verify the configuration of MAC VLAN on each interface.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
VLAN-ID
------------
10
MAC VLAN Configuration
Configuration Guide 170