Table of Contents
Advertisement
Switching
3
Configuring IGMP Snooping
Choose the menu Switching > IGMP Snooping to load the following page.
Figure 3-1 Configuring IGMP Snooping
Follow these steps to configure IGMP Snooping.
1) Enable IGMP Snooping. Enable or disable report message suppression according to
your needs. Click Apply.
IGMP Snooping
Report Message
Suppression
2) In the table below, you can view the current IGMP group information.
IP Address
VLAN ID
Ports
Enable or disable IGMP Snooping globally.
Enable or disable Report Message Suppression globally. When enabled, the
switch will only forward the first IGMP report message for each multicast group to
the IGMP querier during one query interval, and suppress subsequent IGMP report
messages for the same multicast group. This feature prevents duplicate report
messages from being sent to the IGMP querier.
Displays the IP address of the multicast group.
Displays the VLAN ID of the multicast group. All port members of a multicast
group should be included in the same VLAN.
Displays the forwarding port list of the multicast group.
Configuring IGMP Snooping
User Guide
27
Advertisement
Table of Contents
