Managing System
After upgrading, the
device will reboot
automatically with
the backup image
4.1.5 Rebooting the switch
Choose the menu System > System Tools > System Reboot to load the following page.
Figure 4-5 Rebooting the switch
In the System Reboot section, select the desired unit and click Reboot.
Target Unit
Save Config
4.1.6 Configuring the Reboot Schedule
Note:
T1600G-18TS does not support this feature.
Choose the menu System > System Tools > Reboot Schedule to load the following page.
Figure 4-6 Configuring the Reboot Schedule
Follow these steps to restore the configuration of the switch:
1) In the Reboot Schedule Setting section, select one method and specify the
parameters.
Select this option to reboot automatically with the backup image after upgrading.
Select the desired unit to reboot. By default, it is ALL Unit.
Select this option to save the configuration before the reboot.
System Tools Configurations
Configuration Guide
48