TP-Link T1600G-18TS Configuration Manual page 560

Configuring ACL
Switch(config)#access-list extended 1600 rule 6 deny sip 10.10.70.0 smask
255.255.255.0
6) Create Policy Market, and then apply ACL 1600 to it.
Switch(config)#access-list policy name Market
Switch(config)#access-list policy action Market 1600
Switch(config-action)#exit
7) Bind Policy Market to port 1/0/1.
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#access-list bind Market
Switch(config-if)#end
Switch#copy running-config startup-config
Verify the Configurations
Verify the configurations:
Switch(config)#show access-list 1600
Extended IP access list 1600
rule 1 permit sip 10.10.70.0 smask 255.255.255.0 dip 10.10.80.0 dmask 255.255.255.0
rule 2 permit sip 10.10.70.0 smask 255.255.255.0 protocol 6 d-port 80
rule 3 permit sip 10.10.70.0 smask 255.255.255.0 protocol 6 d-port 443
rule 4 permit sip 10.10.70.0 smask 255.255.255.0 protocol 6 d-port 53
rule 5 permit sip 10.10.70.0 smask 255.255.255.0 protocol 17 d-port 53
rule 6 deny sip 10.10.70.0 smask 255.255.255.0
Switch(config)#show access-list bind
Index
-----
1
Index
-----
Policy Name
-----------
Market
Acl Id
-----------
Interface/VID
-------------
Gi1/0/1
Interface/VID
-------------
Configuration Example for ACL
Direction Type
-------- ----
Ingress Port
Direction Type
-------- ----
Configuration Guide 537