Configuring Network Security
Verify the configuration of ARP Detection:
Switch_A#show ip arp inspection
ARP detection global status: Enabled
Port
Gi1/0/1
Gi1/0/2
Gi1/0/3
Gi1/0/4
......
Verify the configuration of ARP Defend:
Switch_A#show ip arp inspection interface
Port
OverSpeed Rate Current
Gi1/0/1 Enabled
Gi1/0/2 Enabled
Gi1/0/3 Enabled
Gi1/0/4 Disabled
......
8.2 Example for 802.1X
8.2.1 Network Requirements
The network administrator wants to control access from the end users (clients) in the
company. It is required that all clients need to be authenticated separately and that only the
authenticated clients can access the Internet.
8.2.2 Configuration Scheme
To authenticate clients separately, enable 802.1X authentication, configure the control
mode as auto, and set the control type as MAC based.
Enable 802.1X authentication on the ports connected to clients.
Trusted
NO
NO
NO
YES
15
N/A
15
N/A
15
N/A
15
N/A
Status
LAG
Normal
N/A
Normal
N/A
Normal
N/A
N/A
N/A
Configuration Examples
Configuration Guide
610