Poe Power Management Configurations - TP-Link T1600G-18TS Configuration Manual

Configuring PoE
2

PoE Power Management Configurations

With PoE Power Management, you can:
 Configure the PoE parameters manually
 Configure the PoE parameters using the profile
You can configure the PoE parameters one by one via configuring the PoE parameters
manually. You can also set a profile with the desired parameters and bind the profile to the
corresponding ports to quickly configure the PoE parameters.
2.1 Using the GUI
2.1.1 Configuring the PoE Parameters Manually
Choose the menu PoE > PoE Config > PoE Config to load the following page.
Figure 2-1 Configuring PoE Parameters Manually
Follow these steps to configure the basic PoE parameters:
1) In the Global Config section, specify the System Power Limit and click Apply.
System Power
Limit
Specify the maximum power the PoE switch can supply.
PoE Power Management Configurations
Configuration Guide 489