Configuring Event - TP-Link T1600G-18TS Configuration Manual

Configuring SNMP & RMON
Step 3
Step 4
Step 5
The following example shows how to create a history entry on the switch to monitor port
1/0/1. Set the sample interval as 100 seconds, max buckets as 50, and the owner as
monitor:
Switch#configure
Switch(config)#rmon history 1 interface gigabitEthernet 1/0/1 interval 100 owner
monitor buckets 50
Switch(config)#show rmon history
Index Port
----- ---------
1 Gi1/0/1
Switch(config)#end
Switch#copy running-config startup-config

5.2.3 Configuring Event

Step 1
show rmon history [ index ]
Displays the specified history entry and related configurations.
Enter the index of history entries that you want to view. The range is 1 to 12, and the
index:
format is 1-3 or 5.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
Interval Buckets
----------- ----------- ---------
100 50
configure
Enter global configuration mode.
Owner State
-----
monitor Enable
RMON Configurations
Configuration Guide 726